All the colors of RAL and SIKKENS are available in our PU cast floors.There are a variety of colors available in mineral floors, but the effect will be different than the synthetic resin floors as the pigments are blended with cement. If you want to know more about the colors, feel free to ask.Colors can also be combined with one another, which will yield a certain pattern when they are combined.We can show you much more in our showroom in order to help you make a decision.

In order to ensure the highest quality, only the best specialists work for The Liquid Collection. They must have a passion for the product and consider quality to be of paramount importance. A number of houses and projects have already been provided with the most beautiful cast floors by our specialists. A guarantee that we can give is the quality of our craftsmanship.All of the work is carried out by ourselves and not by third parties.

This is necessary to carry out preparatory work, to seal holes and any cracks, to prepare the floor for the pou-ring process. Pouring the floor itself, sanding and varnishing.Sometimes it is the case that due to weather conditions it takes a little longer because the new floor has not dried well enough.After a week and a half you are assured to be able to enter your floor again.

The use of cast floors is extremely suitable for underfloor heating systems. Cast flooring quickly conducts heat and as a result, it is very comfortable to walk on.

It is one of the most hygienic surfaces that can be installed. Floors are non-porous and seamless so that no dirt can remain on the surface or penetrate throughout. The floors are also easy to clean.

It is possible to install a cast floor if there is a slope of no more than 1 cm per linear meter. This can be accom-plished by applying a smoothing layer to the slope.

The thickness of a cast floor is at least 2-3 mm and no more than 4-5 mm  

The cast floors we make are UV-resistant, meaning they do not discolor, and the color is stable.

At The Liquid Collection we are able to repair or maintain all cast floors, regardless of whether the floors were installed by us or not. It is important to note, however, that the outcome of a repair does depend on the quality of the cast floor as well as the nature of the damage. Deep cracks or scratches may remain visible after the repair process.

It is possible to apply cast floors to many different types of surfaces, such as tile floors, sand cement floors, fermacell, anhydrite and so on.It is of the utmost importance that the floor be flat and stable.

It is sometimes necessary to prepare the floor prior to applying the cast floor in order to make it flat, and if this is required, we can handle it for you.

Cast floors, in principle, are wear-resistant. However, any floor can be scratched, so it also depends more on the way you take care of your floor. Putting felt pads under the chair legs and furniture can make a big difference. You can use a walk-in mat, for example.You can find various applications on the Scratch No More site that you can use to protect your floor from scratches“Scratch no More develops and manufactures high-quality floor protection products that prevent damage to floors by scratching furniture legs, chairs, tables, and other furniture. They offer complete floor protection systems for almost all furniture types as part of their extensive product offering. ”The best thing for the floor is to have as little sand as possible in the house.The best thing to do for your floor is not to let the kids wear their skates inside!

With a cast flooring, you have the added advantage of being able to repaint and refresh it whenever there are signs of wear after a number of years of use.

It can be said that a cast floor is nearly maintenance-free, which means that only vacuuming and mopping is required to maintain it. Upon purchasing a cast floor, we provide you with cleaning advice.There are some cleaning agents that are not compatible with cast floors. These aggressive cleaning agents can wear the floor down.Our recommendation is to use a special Cast floor cleaner to clean the floor.“SUSTAINABLE & STRIPE-FREE CLEANING OF CASTING FLOORS ̈Cast floors retain their elegance, beautiful finish and high-quality for years, when properly and regularly maintained. With a cast floor cleaner, the cast floor can be cleaned sustainably and without streaks. Cast floors are seamless and liquid-tight therefore easy to maintain. To obtain the best results, it is important to protect your floor with a preventive measure, in the form of daily/weekly and periodic maintenance.”If many scratches and stains are likely to occur over time, a new layer of lacquer can be applied to refresh the finish.

Are you already a customer of ours and have you received a quote from us? When this is approved by you, we will be able to include your home or project in our planning as soon as possible. Please do not wait too long with this request, our schedule is already quite full a few months in advance.

There is no doubt that the bathroom is suitable for the installation of a cast floor. Besides being very beautiful and sleek, it also comes in seamless form, which makes it water resistant, hygienic, easy to clean, as well as low maintenance.

Due to the fact that epoxy is harder than PU and is able to withstand heavy loads, it is ideal for use in com-mercial and industrial applications. Because this floor is harder, there will be a greater possibility that there will be cracks that require proper pre-treatment.It is more common for homeowners to install a Polyurethane (PU) cast floor in their homes than Epoxy floors, since PU is softer and more elastic.

Cast floors can be expected to last for fifteen to twenty years, assuming they are properly installed. At some point, however, it may be necessary to replace the top layer of the floor. In addition, the way the floor is hand-led will make a difference as well.

Please fill out our contact form ‘REQUEST A QUOTE’ on our website in order to request a quote from us. We also encourage you to come into our showroom for a no-obligation exploration meeting, after which we can provide you with a no-obligation quote.

Our team will start its work on Monday or Tuesday, which will be communicated to you beforehand. You will be able to return to your floor the following

Monday if everything goes according to plan. If this is not the case, we will inform you as soon as possible during our working week.

It is IMPERATIVE if underfloor heating is present to follow a heating protocol, which is as follows:

Day 1: 15ºC

Day 2: 20ºC

Day 3: 25ºC

Day 4: 30ºC

Day 5: 35ºC

Day 6: 40ºC

Day 7: 35ºC

Day 8: 30ºC

Day 9: 25ºC

Day 10: 20ºC

It is important to deliver the space in the following manner:

- Space to be wind and waterproof

- The underfloor heating must be turned OFF if we start on Monday

- The room must be completely empty and free of any obstacles

- Spaces must be delivered clean and ready to use

- It is necessary to remove all the interior doors

- A staircase must be present if there are multiple levels in the building

- The skirtings are only installed after the cast floor has been applied- It is possible to finish the stairs only after the cast floor has been applied

- There must be adequate lighting in the room

- We are not responsible for the painting that may need to be done after the cast floor has been applied, so it is prudent that this is done after the pour.

- The failure to follow these instructions will not allow us to do our job properly, and it might affect the warranty.

We would like to have the keys to your home by the weekend before we begin our work, so we can begin the process right away.

Our Showroom is located at Nieuwstad 4, 1381 CC Weesp

Upon completion of our work at your home, we will leave the keys in the building for you.

Using aluminum profiles we can create a recess for a doormat, if that is what you want.

The doormat needs to be marked on the floor as to where it will be placed. We will follow your measure-ments.

- It is always advisable to be careful when moving heavy furniture or boxes, this could lead to scratches.

- Make sure to place felt pads under your furniture and chairs.

- Look out for hairspray on the floor as, due to a chemical reaction, it leaves stains on the surfa-ce.- Whenever you spill oil, red wine, or anything of the sort, you should try to remove it as quick-ly as possible in order to prevent it from staining.

- You can clean the surface using a self-leveling cleaner or a mild green soap cleaner.- Use a soft brush when vacuuming.

- In order to prevent rubber plasticizers from penetrating your screed floor, try to avoid rubber coming into contact with your floor as much as possible.

In some cases, the color or finish of a product may vary from the color of the sample plate. Sample plates/samples are only indicative.